Description
Model: Evergush ET400 (Price is Negotiable)
Evergush ET400 is an automatic electronic constant pressure pump with built-in electronic controller(CPU). It provides constant pressure which ensures that the pump starts automatically when water is consumed and operates continuously until water is not required.
Features
- Built-in microchip control. Automatic power off when no water is detected within 60 seconds, to avoid the motor being burn up.
- Low operation noise. The supply of water pressure is stable, and the water pressure will not change suddenly when taking a hot bath. The water temperature will not suddenly become cold or hot.
- The pump casing structure is made of reinforced plastic steel, and the wetted parts are not rust or create rust water. The motor shaft also will not get stuck easily due to leave unused for a long time.
- Built-in thermal switch, mainly to avoid frequent ON/OFF or nonstop running which lead to outlet pipeline to burst out by water overheating.
Operating Condition
- Ambient Temp.: Max.40℃.
- Liquid Temp.: 0~40℃.
- Relative humidity: Max.85%(RH).
- Working pressure: Max. 5 bar.
- Before starting the pump, make sure inlet pressure is lower than factory pre-set activation pressure.
- Suitable liquid: Drinking water or clean water without solid particles or non-corrosive fluid.
SPECIFICATIONS
| Power | 0.5HP, 400W, 240V, 50Hz |
| Inlet x Outlet | 1″x1″ |
| Pressure ON | 1.6 Bar |
| Pressure Cut Off | 2.9 Bar |
| Maximum Head | 29mH |
| Maximum Flow | 65L/min |
| Weight | 8.3kg |
