Model: FC25-2D

SAER FC25-2D is a twin impeller close coupled centrifugal water pump.

  • Single Phase
  • Made in Italy


  • Twin impeller close coupled centrifugal pump is fitted with 2 opposing impellers housed in the pump body on the rotor shaft by means of keyways.
  • The opposing impeller’s functioning in series on the same motor shaft ensures perfect balance is achieved, thus avoiding overloading the motor bearings brought by hydraulic thrust loads.
  • The liquid pumped is conveyed into the spiral shaped volute of the pump body, transforming the kinetic energy into dynamic pressure energy.
  • Pressure and flow is achieved with minimum loss due to the hydrodynamics closed impeller design.


  • Industrial water supply
  • Pressurised water using pressure vessels
  • Horticultural & agricultural irrigation
  • Civil and domestic water transfer
  • Boiler & Chiller
  • Refrigeration

Application Limit

  • Temperature of the liquid to +70 °C
  • Ambient Temperature da -15 °C to +40 °C
  • Manometric suction lift up to 8 m (HS)
  • Max. working pressure 10 bar


  • Can be installed with the motor shaft in either vertical or horizontal position.
  • In the event of vertical installations, the motor must always be positioned above the pump body.


Size Discharge 1¼” x 1”
Power 1100 W / Single Phase
Flow Rate 17 ~ 117 L/min
Head 43 ~ 23  meters
Manometric Suction Lift Max. 8 meters
Liquid Temperature Max. +70°C
Environment Temperature Max. +40°C
Dimensions (L x W x H) 381mm x 190mm x 265mm
Weight 25 kg

Accessories Included

  • Without cable
  • Carton box

Additional information

Weight 25 kg

Power Source

You may also like…