Description
Model: M600C
SAER M99 stainless steel self priming water pump.
- 1 phase
- Made in Italy
Descriptions
- Pump body in AISI304 stainless steel, motor support in die cast aluminium.
- This series of electric self prime close coupled pumps has the characteristic of the nozzle and venturi being housed in the pump body.
- The fluid generated by the impeller is passed only in part to the outlet, the remaining fluid is recycled by means of the venturi system which is connected within the pump body. This allows the self prime function.
- At the first starting, it is enough to fill the pump body with the liquid that, circulating through the venturi, transfers the air from the suction to the delivery, ejecting it through the delivery piping. Therefore the vacuum which is generated makes the liquid go up along the suction piping, allowing the prime function.
- The presence of the venturi system enables these pumps to be insensitive to the presence of air into the pumped liquid.
Applications
- General water supply
- Pressurisation of water by using pressure vessels (autoclaves) horticultural irrigation
- Mist irrigation, Dairy, farm also industrial applications.
Application Limit
- Temperature of the liquid to +50 °C
- Ambient Temperature da -15 °C to +40 °C
- Manometric suction lift up to 9 m (HS)
- Max. working pressure 8 bar
Installations
- Upon installation always prime the pump body first before start up. Pump must be installed with the motor shaft in the horizontal position.
Specifications
| Size Discharge | 1½” x 1¼” |
| Power | 1500 W / Single Phase |
| Flow Rate | 10 ~ 117 L/min |
| Head | 45 ~ 22 meters |
| Manometric Suction Lift | Max. 9 meters |
| Liquid Temperature | Max. +50°C |
| Environment Temperature | Max. +40°C |
| Dimensions (L x W x H) | 597mm x 230mm x 246mm |
| Weight | 22 kg |
Accessories Included
- Without cable
- Carton box
