Model: WS3500M (Made in Taiwan)
Wind Speed WS3500M is a magnetic drilling machine with maximum drilling capacity up to 35mm.
- 2 modes of cutter : “One Touch Shank” or “Weldon Shank” etc.
- 2 drilling types : “Annular Cutter” OR “Drill Chuck” for loading “Twist Drill” or “Hole Saw”.
- Bearing bracket aligns cutter precisely : increase cutter and motor life.
- Roller bearing 1 : Increase the stability of main shaft and prevent motor and shaft sway easily.
- Roller bearing 2 : Reduce the abrasion hence, increase the life of cutter.
- Double coil magnetic base : Prevent any disturbances on progress while 1st coil is overheated.
- Electronic switch : Provides constant voltage.
- Light weight : 14kg
|Voltage||240V (Single Phase)|
|Coolant Supply||via Tool Holder|
|Power consumption on Magnet||38W|
|Adhesion of Magnet||7350N / 750kgf|
|Dimension of Magnet (L x W x H)||186mm x 80mm x 58mm|
|Coring Diameter (Annular Cutter)||13mm – 35mm|
|Coring Depth (Annular Cutter)||9mm – 50mm|
|Coring Diameter (HSS Drill Bit)||1 – 13mm|
- Pilot pin 8.0mm x 91mm x 1pc
- Double Open End Wrench x 1pc
- Hex Key Wrench 2.5mm x 1pc
- Hex Key Wrench 6.0mm x 1pc
- Operating handle x 3pcs
- Lifting handle x 1pc
- Fuse block x 1pc
- 13mm drill chuck with arbor adaptor : RM250.00/set