Xest Ling ZXSM45: Double Spindle, Drill:31mm, Tapping:M33, Spindle Speed:2200rpm, 2.2kW, 3phase, 500kg


Available on backorder


Model: ZXSM45 (3phase)

Xest Ling ZXSM45 is a drilling & tapping machine with double spindle.


  • The machine can tapping directly after drilling without change tools, increase the efficiency
  • The machine can drill or tap several holes at same time, not only increase the efficiency, but also ensure different holes distance.
  • To obtain different holes distance only need to adjust the distance between the spindles of multi-spindles, not use many jig and reduce the produce cost.
  • The machine can work with air-jig, fasten it, and the efficiency is very high, not only save time but also energy.
  • The lengthways travel of the table is air  pressure auto feeding, save time but also energy and also improve the efficiency.
  • It can process multi-holes, can drill, ream, enlarge and tap the holes of different holes distance diameter and number.
  • The scope of the holes distance is very wide to adjusting the multi-spindle head, the No. of spindle is can be changed according to the customer requirement.
  • It’s no need to reinstall the workpiece to tapping after drilling , just have to pull table travel, then the workpiece moving to the position of the tapping spindle to tapping.
  • The machine can process multi-holes with the multi spindles according to the customers demands or can drill, ream and tap only one hole without multi spindle.


Max.drilling capacity 31.5mm
Max.tapping capacity M33
Spindle travel 100mm
Distance spindles 200mm
Distance spindle to column 275mm
Distance spindle nose to working surface of base 515mm
Spindle taper MT3
Spindle speeds Drill:75、130、240、390、670、1200


Spindle speeds series 6speeds
Dimension of worktable 800mm x 240mm
Table travel 200mm x200mm
Overall height 1820mm
Motor 2.2KW
G.W/N.W 550kg/500kg
packing dimension 109x89x190cm

Additional information

Weight 550 kg

Power Source

You may also like…