Description
Model: CM1C
SAER CM1C is a centrifugal water pump.
- Three Phase
- Made in Italy
Descriptions
- Close coupled.
- Single impeller.
- The liquid pumped is conveyed into the spiral shaped volute of the pump body transforming the kinetic energy into dynamic pressure energy.
- Pressure and flow is achieved with minimum loss by means of the hydrodynamic closed impeller design.
Applications
- General water supply
- Pressurised water using vessels
- Agriculture irrigation
- Mist irrigation
- Boosting shower
- Garden watering applications
Application Limit
- Temperature of the liquid to +70 °C
- Ambient Temperature da -15 °C to +40 °C
- Manometric suction lift up to 8 m (HS)
- Max. working pressure 9 bar
Installations
- Upon installation always prime the pump body first before start up. Pump must be installed with the motor shaft in the horizontal position.
Specifications
| Size Discharge | 1″ x 1″ |
| Power | 2200 W / Three Phase |
| Flow Rate | 20 ~ 133 L/min |
| Head | 57 ~ 35 meters |
| Manometric Suction Lift | Max. 8 meters |
| Liquid Temperature | Max. +70°C |
| Environment Temperature | Max. +40°C |
| Dimensions (L x W x H) | 342mm x 240mm x 290mm |
| Weight | 27 kg |
Accessories Included
- Without cable
- Carton box
